Rolling Metal Cut-Off Rack Plans | 6-Bay Drop & Stock Cart | No CNC | PDF

Get the drop pile off the floor with a rolling vertical cut-off rack. From a working Bethlehem, PA fabrication shop. Six upright bays hold cut-offs, drops and short sticks up to about 6 ft, sorted by shape, and four locking casters let you roll it to the saw. All frame cuts are square, and the floor is a simple sheared rectangle. No CNC needed.

What's included (instant PDF download, 3 pages)

• Dimensioned drawings of the full rack
• Materials buy list nested on 20 ft sticks
• Exact cut list (all 90° cuts)
• Tack-and-weld sequence for a square, flat base
• Caster pad, drain hole and divider grid details
• Hardware, caster, tool and finishing lists

Specs

• Footprint: 36" L x 20" W, about 55-3/4" tall on 5" casters
• 6 compartments, each about 11" x 8-1/2" at the top
• Frame: 2" x 2" 11 ga tube; dividers 1" x 1" 14 ga tube; 12 ga sheet floor
• About 600 lb evenly loaded (guide, not an engineered rating)

Skill level & tools

Beginner. Build time one day. Chop saw or bandsaw, angle grinder, MIG welder (flux-core OK), drill, squares and clamps.

Photos are illustrations of a finished build, not the actual build; your build will vary.

Digital product

This is a downloadable PDF plan, not a physical item. Nothing ships. Builder's license: build as many as you like and sell what you build. Please don't copy, share or resell the plans or PDF. A shout-out to Jackson Fab Plans is appreciated.

Disclaimer: Plans are provided as-is for builders who already know how to weld and use their tools safely. Skill levels describe how complex the project is, not how much welding experience you need. You are responsible for verifying dimensions, weld quality, loads and safe shop practices. Any load figures are guides, not engineered ratings. Welding and cutting are hazardous; always wear proper PPE. See our Terms of Service.

Jackson Fab Plans is a brand of Jackson Fabrication & Welding LLC, Bethlehem, PA.